Guidelines for administering VoIP
Administering VoIP is similar to administering circuit-based connections, however, there are some important differences:
- Configuration parameters you set up on the DEFINITY or MultiVantage switch must match parameters for VoIP on the Avaya IR system. See Configuring DEFINITY or MultiVantage for VoIP for more information.
- If you are using the VoIP Monitoring Manager (VMM) to monitor the audio quality of VoIP calls, configuration settings on the Avaya IR system must match those in the VoIP Monitoring Manager (VMM) application.
- IP connectivity must be present between the Avaya IR system, the DEFINITY or MultiVantage system, and the system where the VoIP Monitoring Manager application resides.
This section explains how to administer VoIP on the Avaya IR system and provides key information on configuring a DEFINITY or MultiVantage switch to interface with an Avaya IR system. Refer to the DEFINITY documentation for complete H.323 configuration procedures. Refer to the Voice over IP screens for detailed information on Web administration fields for VoIP.
