Procedure for administering VoIP

To administer VoIP:

1. Configure the DEFINITY or MultiVantage system for VoIP, using ASA or another tool.

   For more information, see Configuring DEFINITY or MultiVantage for VoIP.

2. Configure the IR system, using the Web Administration interface or the voip command.

   For more information, see Administering Voice over IP.

3. Establish network connectivity between the IR system and the DEFINITY or MultiVantage system.

   VoIP requires an IP connection between the IR system and the DEFINITY or MultiVantage system. If you are using the VoIP Monitoring Manager (VMM) to monitor call quality, then the system running that application must be part of IP communications also.

4. Start the voice system on the IR system.

   For more information, see Stopping and starting the voice system.

5. Test connections and voice response functions.

© 2006 Avaya Inc. All Rights Reserved.