Assigning a VoIP Card

To assign a VoIP card:

1. From web administration, go to the Assign VoIP Card screen (Configuration Management > Switch Interfaces > Voice over IP > Assign Card).

   The system displays the Assign VoIP Card screen. For information about this screen, see Assign VoIP card screen.

2. In the Card field, select the card to which you want to assign VoIP.
3. Select Submit.

   The system displays the the Assign VoIP Card screen. For information about this screen, see Assign VoIP for Card number screen.

4. In the Card IP Address field, specify the IP address assigned to the NIC that is used by the virtual VoIP card to connect to the packet network.
5. In the Gatekeeper IP Address field, specify the IP address of the Gatekeeper that is configured to accept registration requests from the virtual VoIP card.

   Note:
   If a DEFINITY or MultiVantage system is functioning as the Gatekeeper, the IP address you enter here should be IP address assigned to the Node Name that represents the C-LAN card on the IP Node Names form.

6. For the remaining fields, examine the default parameter values and change any values that are not appropriate for the communications system at the far end of the channel.
7. Select Submit.

   The system displays information about the success or failure of the administration attempt.

Administration changes do not take effect until you stop and start the voice system (see Stopping and starting the voice system). Also, you must stop and start the voice system before you can assign telephone numbers or services to VoIP channels.

Caution:
Stopping the voice system ends call processing. Stop the system when no calls or few calls are coming in. If possible, reroute calls to another Avaya IR system.

© 2006 Avaya Inc. All Rights Reserved.