Changing VoIP Parameters

To change VoIP parameters:

1. From web administration, go to the Change VoIP Parameters screen (Configuration Management > Switch Interfaces > Voice over IP > Change Parameters).
2. Select the card you want from the drop-down list and select Submit.

   The system displays the fields containing the parameters for the selected card.

3. Make entries in any VoIP fields that you need to change.

   See the Change VoIP Parameters for Card number screen for guidelines on completing these fields.

   If you make changes to telephone numbers for VoIP channels, go to the Assign Phone Number to Channel screen and re-assign telephone numbers to the VoIP channels.

4. Select Submit.

   The system displays a message advising you that you must stop and start the voice system for the changes to take effect.

5. Stop and start the voice system at the appropriate time.

Caution:
Stopping the voice system ends call processing. Stop the system when no calls or few calls are coming in. If possible, reroute calls to another Avaya IR system.

© 2006 Avaya Inc. All Rights Reserved.