Changing the engine associated with a recognition type

Note:
The following procedure can be used only to change the speech recognition engine for recognition types OPSR4 through OPSR9. For recognition types DPR and WHOLEWORD, there is only one speech recognition engine and it cannot be changed.

To change the speech recognition engine associated with a recognition type:

1. From web administration, go to the Speech Proxy Administration screen (Feature Packages > Speech and DPR Administration > Administration).
2. Select Speech Recognition and DPR Configuration.

   The system displays the Speech Recognition and DPR Configuration screen. For information about this screen, see Speech Recognition and DPR Configuration screen.

3. In the Recognition Type field, select the recognition type that you want to change.
4. Select Change.

   The system displays the Change Speech Recognition Configuration screen. For information about this screen, see Change Speech Recognition Configuration screen.

5. In the Engine field, select nuance, speechworks, mrcp or other (for TDD modem and recognition engines other than Nuance, SpeechWorks, and MRCP-compliant engines).

   Note:
   The value that you select for the Engine field must be consistent with the engine that is running on the speech server.

6. Select Submit.

   The system displays information about the success or failure of the administration attempt.

Administration changes do not take effect until you stop and start the voice system (see Stopping and starting the voice system).

© 2006 Avaya Inc. All Rights Reserved.