Configuring the modem

The system is pre-configured to automatically set up the modem for dial-in (for remote maintenance) and dial-out (for alarming).

If you have trouble with dialing in or out, reset the modem.

To reset the modem:

1. Log in as root.
2. At the command prompt, enter resetModem
3. Enter setDialInPort ttyx 19200 where x is a for the Sun Blade 150, b for the Sun Fire V240 or the Sun Fire 280R.
4. Enter resetModem
5. Enter setDialInPort disable
6. Enter setDialInPort ttyx 19200
7. Enter resetModem

Note:
If you want to modify the modem configuration after installation, use the Avaya IR Web Administration interface after the system is set up and running. See Starting the Web Administration interface.

© 2006 Avaya Inc. All Rights Reserved.