Activating disk mirroring for a new hard disk drive

To activate disk mirroring for a new hard disk drive:

1. If you are not logged in, log in as root.
2. Enter stop_vs to stop the voice system.
3. Install a new hard disk drive that has the same geography and size as the drive that failed.

   For information on how to remove a disk drive, see the Sun Fire V210 and V240 Servers Parts Replacement Manual or the Sun Fire 280R Server Service Manual.

4. Enter mirror_admin replace.

   The new hard disk drive is partitioned and synchronized to the other hard disk. It takes approximately 20 minutes for each 10 GB to copy data to the new hard disk.

   For more information on this command, see mirror_admin command.

© 2006 Avaya Inc. All Rights Reserved.