more topics

Primary Rate Interface (PRI) and T1 Feature

Description

Line Compensation

Line compensation adjusts for the amount of cable loss, in decibels (dBs), based on the length of cable between the 100D, 100R INA, or 100DCD module and the CSU or other far-end connection point. The factory setting is a value of 1, which allows a maximum loss of 0.6 dB. The possible settings are shown in See Line Compensation Settings.

Topics
	Description
	Called Party Nunber (CdPN) Calling Party Number (CPN) Lines / Trunks PRI T1 DS1 Facility Options Type of Service Framing Format Line Coding Channel Service Unit   Line Compensation Signaling Mode Tandem PRI Trunks Tandem PRI Trunk Programming PRI Programnming Options PRI Programnming Options - PRI Telephone Number PRI Programnming Options - Network Services Supported PRI Programnming Options - Copy Telephone Number to Send PRI Programnming Options - Telephone Number to Send PRI Programnming Options - Test Telephone Number   PRI Programnming Options - Timers and Counters PRI Programnming Options - Terminal Equipment Identifier (TEI) PRI Call Processing Incoming Calls Outgoing Calls Network Selection Table Call-by-Call Services Table Station Identification - Automatic Number Identification T1 Programming Options T1 Programming Options - T1 Tie Trunk Connections T1 Programming Options - T1 Routing by Dial Plan System-wide Programming Options - Clock Synchronization System-wide Programming Options - Clock Switching
	At a Glance
	Considerations & Constraints
	Incoming Calls Outgoing Calls
	System Programming
	Mode Differences
	Feature Interactions