more topics

Tandem Switching Feature

At a Glance

Users Affected

All

Reports Affected

General Trunk Information, Extension Information

Modes

Hybrid/PBX

Telephones

All

Maximums

Switch identifier numbers

 

No value = not connected to a networked switch;
1-20 = trunk connected to a non-satellite MERLIN MAGIX, MERLIN LEGEND, DEFINITY ECS, DEFINITY BCS, or DEFINITY ProLogix system with Centralized Voice Messaging more than 200 miles away;
21-40 = trunk connected to a satellite MERLIN MAGIX, MERLIN LEGEND, DEFINITY ECS, DEFINITY BCS, or DEFINITY ProLogix system with Centralized Voice Messaging less than 200 miles away;
41-50 = trunk connected to a non-satellite DEFINITY ECS, DEFINITY BCS, or DEFINITY ProLogix Solutions system without Centralized Voice Messaging, that is more than 200 miles away;
51-60 = trunk connected to a satellite DEFINITY ECS, DEFINITY BCS, or DEFINITY ProLogix Solutions system without Centralized Voice Messaging, that is less than 200 miles away

Factory Settings

PRI Tandem Trunks 1

Network Service

Routing

Copy Telephone No. to Send

 

 

 Electronic Tandem Network (ETN)

 Route directly to UDP

 Copy


1 When the switch type is set to MERLIN-Ntwk or MERLIN-PBX, these settings are made automatically and cannot be changed unless the switch type is chsnged. You can add or remove B-channels from the assigned B-channel group.


Topics
  Description
 
  Switch Identifiers
ARS, UDP Routing and Remote Access
Local Calls Routed to Other Systems
Network Calls Routed via the Local System
  At a Glance
  System Programming
Feature Interactions