Some dialing sequences need special characters--for example, the user presses Hold to insert a Pause character after the dial-out code in a dialing sequence to allow the system to seize an outside line before dialing the number. A Pause character can also be used to separate a telephone number from an extension number.
Special Characters for 4400D and Multiline 4400-Series Telephones
|
Press... |
See... |
Means... |
|---|---|---|
|
Trnsfr |
s |
Stop. Inserts a Stop within a sequence of automatically dialed numbers--for example, an outside Auto Dial button may be programmed with a password, then a Stop, then a telephone number. To use Auto Dial with a Stop in the sequence, the user presses the button to dial the password, listens for the dialing and connection, and presses the button again to dial the number. |
|
Hold |
p |
Pause. Inserts a 1.5-second pause in the dialing sequence. Multiple consecutive pauses are allowed. |
|
Conference |
f |
Flash. Sends a switchhook flash. Must be the first entry in the dialing sequence. |
|
## |
# |
End of Dialing for Auto Dial buttons. Used at the end of a dialing sequence to indicate that the user has finished dialing or to separate one group of dialed digits from another. |
|
# |
# |
End of Dialing. Used at the end of a dialing sequence to indicate that the user has finished dialing or to separate one group of dialed digits from another. |
| Topics | |
| |
Description |
| |
4400-Series and Single-Line Telephones |
| |
4400D and Multiline 4400-Series Telephones |
| |
MLX-10 and MLX-5 Non-Display Telephones |
| MLX Display Telephones | |
|
ETR and MLS Non-Display Telephones |
|
ETR and MLS Display Telephones |