Some dialing sequences need special characters--for example, the user presses Hold to insert a Pause character after the dial-out code in a dialing sequence to allow the system to seize an outside line before dialing the number. A Pause character can also be used to separate a telephone number from an extension number.
Special Characters for MLX-10 and MLX-5 Non-Display Telephones
|
Press... |
Means... |
|---|---|
|
Drop |
Stop. Halts the dialing sequence to allow for system response. |
|
Hold |
Pause. Inserts a 1.5-second pause in the dialing sequence. Multiple consecutive pauses are allowed. |
|
Conf |
Flash. Sends a switchhook flash. Must be the first entry in the dialing sequence. |
|
# |
End of Dialing for extension programming only. Used at the end of a dialing sequence to indicate that the user has finished dialing or to separate one group of dialed digits from another. |
|
## |
End of Dialing. Used to signal the end of the dialing sequence or to separate one group of dialed digits from another. |
| Topics | |
| |
Description |
| |
4400-Series and Single-Line Telephones |
| |
4400D and Multiline 4400-Series-Series Telephones |
| |
MLX-10 and MLX-5 Non-Display Telephones |
| MLX Display Telephones | |
|
ETR and MLS Non-Display Telephones |
|
ETR and MLS Display Telephones |