Primary Rate Interface (PRI) and T1 Feature

Description

Channel Service Unit

The channel service unit (CSU) is the interface between the 100D module and the DS1 facility provided by the telephone company. This facility contains 24 channels on one 4-pair wire.

The CSU is a hardware component needed when two endpoints are located in different buildings or when the distance between the two endpoints makes office or line repeaters necessary. The CSU is located on the customer's premises and is used to connect the system to DS1 network facilities. The CSU has the following functions:

There are several channel service units: ACCULINK 3150 and 3160/3164 ESF T1 CSUs, ESF T1 CSU (no longer available but still supported), and 551 T1 L1 CSU (no longer available but still supported). The ACCULINK 3150 or 3160/3164 CSUs are recommended for this system because they allow maintenance without interrupting service and provide diagnostic and testing capabilities as well as B8ZS line coding. They can be programmed remotely or onsite, using menus. The lower-cost 551 T1 L1 CSU does not provide the B8ZS line coding required for 64-kbps data (clear channel signaling support) and for maintenance features, nor does it provide diagnostic and testing capabilities for the DS1 facility.

 

Topics
  Description
 
  Called Party Nunber (CdPN)
Calling Party Number (CPN)
Lines / Trunks
PRI
T1
DS1 Facility Options
Type of Service
Framing Format
Line Coding
Channel Service Unit
  Line Compensation
Signaling Mode
Tandem PRI Trunks
Tandem PRI Trunk Programming
PRI Programnming Options
PRI Programnming Options - PRI Telephone Number
PRI Programnming Options - Network Services Supported
PRI Programnming Options - Copy Telephone Number to Send
PRI Programnming Options - Telephone Number to Send
PRI Programnming Options - Test Telephone Number
  PRI Programnming Options - Timers and Counters
PRI Programnming Options - Terminal Equipment Identifier (TEI)
PRI Call Processing
Incoming Calls
Outgoing Calls
Network Selection Table
Call-by-Call Services Table
Station Identification - Automatic Number Identification
T1 Programming Options
T1 Programming Options - T1 Tie Trunk Connections
T1 Programming Options - T1 Routing by Dial Plan
System-wide Programming Options - Clock Synchronization
System-wide Programming Options - Clock Switching
  At a Glance
  Considerations & Constraints
 
  Incoming Calls
Outgoing Calls
  Mode Differences
Feature Interactions