|
Use this page to add or
change the numeric address
mapping for a remote machine. A numeric address is an alternate
method of addressing messages from Modular Messaging systems to
subscribers on remote machines. You cannot add numeric address mapping
for Modular Messaging or Message Networking remote machines.
Note: You can also administer numeric addresses
for individual subscribers by modifying the Numeric Address field
on the Subscriber Parameters Administration
page.
This page contains the following fields.
Remote Machine Name: Select
the name of the remote machine for which you want to add or change
numeric addressing.
Numeric Address Initialization Type:
This display-only field indicates the base number used in the numeric
address mapping. The base address can be:
-
Null: Select this field to leave the numeric
address empty. This is the default setting.
-
Mailbox ID: Select this option to use the
subscribers' mailbox ID as the base address.
-
Network Address: Select this option to use
the subscribers' network address as the base address.
Map From: Use this field
to specify the digit string, from 0 to 30 digits, that is compared
against the subscribers' base addresses, which is specified in the
Numeric Address Initialization Type field. A match occurs when the
value in the Map From value is the same as the beginning portion
of the base address. When a match occurs, the portion of the base
address that matches the Map From digits is stripped, and the Map
To field value is prepended to the base address to create the numeric
address. Leave this field blank to add the Map To from field digits
to every base address.
The Map From field can be blank. When you leave the Map From field
blank, it matches all base addresses and is used when there is no
other entry in the Map From field that matches the base address.
The Map From entries can be different lengths.
Map To: Use this field to
specify the digits string, from 0 to 30 digits, that is prepended
to the base address after the digits that match the Map From field
are stripped.
The Map To field can be left blank or contain the keywords none
or no action. You can leave the Map To field blank
to indicate that nothing should be prepended to the base address
after any digit stripping takes place. A none in
the Map To field indicates that the numeric address should set to
a blank value. A no action in the Map To field
indicates that the current value of the numeric address should not
be modified. The Map To entries can be different lengths.
The following buttons appear at the bottom of this page:
- Back: Click this button to return to the Numeric Address Administration
page.
- Return to Main: Click this button to return to the Administration
menu.
- Add: Click this button to add the new mapping to the
remote machine.
- Cancel: Click this button to return to the Numeric Address Administration page without saving the changes.
- Help: Click this button to get information about completing
this page.
Top of page
|
