|
This topic provides information about the events generated by the
SW application, which indicate a switch integration problem.
Customer-resolvable alarms
The following events can be resolved by the system administrator.
SW IF140
Description:
MWI blackout period starts. MWI updates will not occur during this
period.
Repair Procedure:
No corrective action is necessary.
SW IF150
Description:
MWI blackout period ends. MWI updates will resume.
Repair Procedure:
No corrective action is necessary.
SW OVL080
Description:
The host switch link is up. The event message displays the switch
number.
Repair Procedure:
No corrective action is necessary.
SW OVL090
Description:
The remote switch link is up. The event message displays the switch
number.
Repair Procedure:
No corrective action is necessary.
SW OVL220
Description:
The oehs process is ready to handle telephone calls. The initialization
is successful, and the system has created the sockets. This event
indicates the successful installation of the package.
Repair Procedure:
No corrective action is necessary.
SW OVL260
Description:
The system received a normal disconnect message from the switch.
This event can be a part of a normal switch shutdown.
Repair Procedure:
No corrective action is necessary.
SW SE160
Description:
A "block" message is received from the switch. MWI updates
will not occur.
Repair Procedure:
No corrective action is necessary.
SW SW100
Description:
A process is starting. The log will display the name of the process.
Repair Procedure:
No corrective action is necessary.
SW SW110
Description:
A process is starting. The log will display the name of the process.
Repair Procedure:
No corrective action is necessary.
SW SW220
Description:
The system was unable to write to a file.
Repair Procedure:
No corrective action is necessary.
SW TY130
Description:
The switch is blocked from MWI updates because:
- An MWI blackout period occurred.
- The switch sent a pause MWI message.
Repair Procedure:
No corrective action is necessary.
SW TY150
Description:
The switch might be sending bad information to the system. Calls
might not be integrated.
Repair Procedure:
No corrective action is necessary.
SW TY170
Description:
Link monitoring is used for this switch.
Repair Procedure:
No corrective action is necessary.
Top of page
|
