|
This topic provides information about running
a Load Daily or Hourly Traffic Report.
To run the traffic reports, enter the command for the report you
want to run at the enter command prompt on the Messaging command
prompt screen. Include the start date or month, or the starting
hour or traffic type, depending on the report. In a few seconds,
the system formats the collected data into the specified report.
The topics in this section are organized as follows:
|
Note: If you do not enter a specific start date or
time, you receive a report for the current day, month, or
hour.
|
Running a Load Daily Traffic Report
The Load Daily Traffic Report shows daily load traffic information
for 1 to 32 days. Traffic load refers to the number of calls handled
by each active port during the reporting period. Port usage measurements
indicate how the ports are actually being used.
To run a Load Daily Traffic Report:
- Start at the Administration main
menu and select:
-
Global Administration
Messaging Administration The system displays the SSH User Authentication
dialog box. Enter your login, for example, sa or vm, in the User name field
and your password in the Password field. Click Login. The system then
displays the Messaging command prompt screen.
At the enter command: prompt, type either:
- list measurements load day
- list measurements load day mm/dd/yy
where mm/dd/yy is the starting date up to 31 days previous
to the current date that you want as a starting point for the
report.
This report records two screens of traffic information for
each day. The system displays Load Daily Traffic screen. See
the Field definitions: Load Daily
Traffic screen for a description of the fields that appear
on this screen.
- Press F1 (Cancel) to return the cursor to the enter command
prompt.
- Enter exit or another administrative command at the
enter command prompt.
Running a Load Hourly Traffic Report
The Load Hourly Traffic Report shows hourly load traffic information
for up to 192 hours (8 days). Traffic load is the number of calls
handled by each active port during the reporting period. Port usage
measurements indicate how the ports are being used.
To run a Load Hourly Traffic Report:
- Start at the Administration main
menu and select:
-
Global Administration
Messaging Administration The system displays the SSH User Authentication
dialog box. Enter your login, for example, sa or vm, in the User name field
and your password in the Password field. Click Login. The system then
displays the Messaging command prompt screen.
- At the enter command prompt, type either:
- list measurements load hour
- list measurements load hour mm/dd/yy
- list measurements load hour mm/dd/yy hh
where mm/dd/yy is the starting date up to seven days
previous to the current date and hh is the starting
24-hour time up to 191 hours previous to the current hour
that you want as a starting point for the report.
The date specification precedes an hour specification. If
you do not enter a date, the current hour of the current date
is used. If you do not enter an hour, the report starts with
the first hour of the date specified.
This report displays two screens of traffic information
for each hour.
The system displays the Load Hourly Traffic screen. See
the Field definitions: Load Hourly
Traffic screen for a description of the fields that appear
on this screen.
- Press F1 (Cancel) to return the cursor to the enter command
prompt.
- Enter exit or another administrative command at the enter
command prompt.
Top of page
|
