|
This topic provides information about running a Network Load Daily
or Hourly Traffic Report.
To run a traffic report, enter the command for the report you want
to run at the enter command prompt on the Messaging command prompt
screen. Include the start date or month, or the starting hour or
traffic type, depending on the report. In a few seconds, the system
formats the collected data into the specified report.
This topic is organized as follows:
| Note: If you do not enter a specific start date
or time, you receive a report for the current day, month,
or hour. |
Running a Network Load Daily Traffic Report
The Network Load Daily Traffic Report shows network channel traffic
one day at a time for up to 32 days. This report can show any nodes
that are exceeding specified threshold limits, the number of calls
that went unanswered, the number of calls on each channel, and other
channel traffic information.
To run a Network Load Daily Traffic Report:
- Start at the Administration main
menu and select:
-
Global Administration
Messaging Administration The system displays the SSH User Authentication
dialog box. Enter your login, for example, sa or vm, in the User name field
and your password in the Password field. Click Login. The system then
displays the Messaging command prompt screen. At
the enter command prompt, type either:
- list measurements network-load day
- list measurements network-load day mm/dd/yy
where mm/dd/yy is the starting date up to 31 days previous
to the current date that you want as a starting point for the
report. If you do not enter a date, the current date is used.
The system displays the Network Load Daily Traffic screen.
See the Field definitions: Network
Load Daily Traffic screen for a description of the fields
that appear on this screen.
- Press F1 (Cancel) to return the cursor to the
enter command prompt.
- Enter exit or another administrative command
at the enter enter command prompt.
Running a Network Load Hourly Traffic
Report
The Network Load Hourly Traffic Report shows network channel traffic
1 hour at a time for up to 192 hours (8 days). This report can show
any nodes that are exceeding specified threshold limits, the number
of calls that went unanswered, the number of calls on each channel,
and other channel traffic information.
To run a Network Load Hourly Traffic Report:
- Start at the Administration main
menu and select:
-
Global Administration
Messaging Administration The system displays the SSH User Authentication
dialog box. Enter your login, for example, sa or vm, in the User name field
and your password in the Password field. Click Login. The system then
displays the Messaging command prompt screen. At
the enter command prompt, type either:
- list measurements network-load hour
- list measurements network-load hour mm/dd/yy hh
where mm/dd/yy is the starting date up to 7 days previous
to the current date and hh is the 24-hour time up to
191 hours previous to the current hour, that you want as a starting
point for the report. The date specification precedes an hour
specification. If you do not enter a date, the current hour
of the current date is used. If you do not enter an hour, the
report starts with the first hour of the date specified.
The system displays the Network Load Hourly Traffic screen.
See the Field definitions: Network
Load Hourly Traffic screen for a description of the fields
that appear on this screen.
- Press F1 (Cancel) to return the cursor to the
enter command prompt.
- Enter exit or another administrative command
at the
enter command prompt.
Top of page
|
