Avaya

Modular Messaging Help

Print | Back | Fwd | Close
Home | Search | Site Index
 Getting Started 
 Administration 
 Maintenance 
 Reference 
Home   >   MAS Administration   >   Configuring basic information for a remote node

Configuring basic information for a remote node

Basic information includes the remote node name and serial number.

To configure basic information for a remote node:

  1. Display the Remote Node Properties dialog box.
  2. Configure the following fields:
    • Name  Enter then name you want to identify the remote Octel Analog Networking node.
    • Serial Number  Enter the unique serial number for the remote Octel Analog Networking node.
    • Delivery rule  Select the delivery rule to be used for sending messages from this node. For information on setting up delivery rules see Setting up delivery rules.
    • Allow messages to be sent to this remote node  Select this if you want to enable your local Octel Analog Networking node to send messages to this remote Octel Analog Networking node. This check box is cleared by default.
    • Allow messages to be received from this remote node  Select this if you want to enable your local node to receive messages from this remote Octel Analog Networking node. This check box is cleared by default.
  3. Click OK or Apply.
    Notes:  
    • To delete a remote node, click the remote node that you want to delete in the Remote Nodes tab and click the Delete icon . The system prompts you to confirm the deletion.
    • To modify remote node details, right-click the remote node that you want to modify in the Remote Nodes tab and click Properties from the shortcut menu. Edit the information in the Remote Node Properties dialog box as required, and click OK.

Home | Search | Site Index | Print | Back | Fwd | Close

©2002 Avaya Inc. All rights reserved. Last modified: