VMSC - MAS - Telephony Interface Dialog Box (IP H.323/IP SIP)

Modular Messaging Help

Getting Started

Installation

Administration

Maintenance

Reference

Home > MAS Administration > VMSC - MAS - Telephony Interface Dialog Box (IP H.323/IP SIP)

VMSC - MAS - Telephony Interface Dialog Box (IP H.323/IP SIP)

Note: For a detailed overview of Messaging Application Server (MAS) configuration in the Voice Mail System Configuration (VMSC) application, see Overview of MAS Configuration in VMSC.

This topic describes how to use the Telephony Interface dialog box to configure ports, if you are using H.323-based or SIP-based IP integration.

You can set the playback volume and configure the number of ports that connect the MAS with the Private Branch Exchange (PBX). You can enable ports and configure properties for each of them.

Launching the Screen

In the Voice Mail System Configuration window, click the voice mail domain.

Click Message Application Servers.

Click on the MAS you want to configure.

Double-click the Telephony Interface.

The system displays the Telephony Interface dialog box for the selected MAS with the General tab selected. This is the only tab.

Note: If the IP H.323/IP SIP telephony interface is not already active, click the down arrow and click Make Active.

Configuring the Screen Controls

Playback Volume Enter a value for the playback volume. The range is -8 (minus 8) through 8, and the default is 2.

Maximum Concurrent Calls Enter the maximum number of ports that connect the MAS to the PBX. This is the maximum number of concurrent calls that the MAS can support. The default is set during installation.

Configure the port fields listed in the grid:

Enable or disable ports, as required, by selecting or clearing the check boxes to the left of each port. All ports are selected by default.

Port The port number is read only.

Top of page