VMSC - VMD - PBX Configuration - General Tab (Dialogic Analog)

Use the PBX Configuration dialog box, General tab to configure the PBX Dual Tone Multi-Frequency (DTMF) dialing tones.

Launching the Screen

In the Voice Mail System Configuration window, click the voice mail domain (VMD).

Double-click PBXs. The system expands the node to show all available types of PBX.

Double-click the Dialogic PBX. The system displays the PBX Configuration dialog box for the selected VMD, with the General tab active.

Configuring the Screen Controls

Go Off Hook when Port Disabled Select to place a port off hook, when it is disabled. If cleared, the port rings but does not answer. This check box is selected by default.

Pause before Digits (ms) Enter the time, in milliseconds, that the voice mail system waits after taking the voice port off hook before becoming available. The range is 100 through 9999, and the default is 580.

Pause Interval for Comma in Dial String (ms) Enter the duration, in milliseconds, represented by a comma in a dial string. The range is 100 through 9999, and the default is 2000.

DTMF Inter-Digit Delay during Dialing (ms) Enter the duration, in milliseconds, between DTMF tones when dialing. The range is 10 through 999, and the default is 80.

DTMF Length during Dialing (ms) Enter the duration, in milliseconds, of a DTMF tone when dialing. The range is 10 through 999, and the default is 80.

DTMF Length during Detection (ms) Enter the length, in milliseconds, of a DTMF tone during detection. The range is 1 through 999, and the default is 50.

DTMF Length during Play (ms) Enter the length, in milliseconds, of a DTMF tone during play. The range is 1 through 999, and the default is 50.