VMSC - VMD - PBX Configuration - Hangup Detection Tab (Dialogic Analog)

Use the PBX Configuration dialog box, Hangup Detection tab to configure PBX hangup detection properties, like string options and tone settings.

Launching the Screen

In the Voice Mail System Configuration window, click the voice mail domain (VMD).

Double-click PBXs. The system expands the node to show all available types of PBX.

Double-click the Dialogic PBX. The system displays the PBX Configuration dialog box for the selected VMD, with the General tab active.

Click the Hangup Detection tab.

Configuring the Screen Controls

Maximum Continuous Tone before Hanging Up (ms) Enter the time, in milliseconds, that the voice mail system listens to a dial tone once a caller hangs up, before dropping the line. The range is 0 through 12000, the default is 6000.

Hangup String Enter the sequence of DTMF digits and call transfer codes (& - = D H N T X P M) that the PBX sends to indicate that a call has terminated (been hung up).

Note: This field is applicable to only certain switches that support inband integration. Leave this field blank for C-LAN, DMI-4, and RS-232 integrations.

Hangup String Timeout (ms) Enter the time, in milliseconds, that the voice mail system waits between digits before validating a hangup string. The range is 0 through 9999, the default is 0.

Minimum Duration for Drop in Loop Current (ms) Enter the time, in milliseconds, that must elapse before the voice mail system recognizes a true drop in loop current. The range is 0 through 3000, the default is 300. Setting this field to 0 disables this feature.

Maximum Silence before Hanging Up (ms) Enter the time, in milliseconds, that the voice mail system waits before hanging up, if a user falls silent while recording. The range is 0 through 12000, the default is 6000.