VMSC - VMD - PBX Configuration Dialog Box (IP SIP)

Modular Messaging Help

Getting Started

Installation

Administration

Maintenance

Reference

Home > MAS Administration > VMSC - VMD - PBX Configuration Dialog Box (IP SIP)

VMSC - VMD - PBX Configuration Dialog Box (IP SIP)

Note: For a detailed overview of voice mail domain configuration in the Voice Mail System Configuration (VMSC) application, see Overview of VMD Configuration in VMSC.

This topic describes how to use the PBX Configuration dialog box to configure Private Branch Exchange (PBX) properties for SIP-based IP integration.

You can configure the PBX to determine the way in which it communicates with the voice mail domain. The PBX is sometimes referred to as the “switch”.

Use the PBX Configuration dialog box to configure the PBX Dual Tone Multi-Frequency (DTMF) dialing tones, the transfer mode, and tone detection.


Notes: In the Voice Mail System Configuration window, under the Voice Mail Domain tree, PBXs node, you can add new PBXs types, if necessary. See VMSC - VMD - Add New PBX Dialog Box. For more information on configuring your PBX, see the PBX configuration notes. Configuration notes are available from the Avaya Support Website at http://www.avaya.com/support.

Launching the Screen

In the Voice Mail System Configuration window, click the voice mail domain (VMD).

Double-click PBXs. The system expands the node to show all available types of PBX.

Double-click the IP SIP PBX. The system displays the PBX Configuration dialog box for the selected VMD.

Tabs Available in this Dialog Box

General Use this tab to set up general PBX options. You can use it to set options for DTMF dialing tones. See VMSC - VMD - PBX Configuration - General Tab (IP SIP).

Transfer/Outcall Use this tab to configure the transfer mode. See VMSC - VMD - PBX Configuration - Transfer/Outcall Tab (IP SIP).

Tone Detection Use this tab to specify the maximum silence before hanging up. See VMSC - VMD - PBX Configuration - Tone Detection Tab (IP SIP).

Top of page