VMSC - MAS - PBX Integration

Use the PBX Integration dialog box, IP SIP tab to configure SIP-based IP integration. This provides IP connectivity between the MAS and the Avaya PBX.

To open the PBX Integration dialog box:

In the Voice Mail System Configuration window, click Message Application Servers.

You may need to expand the tree to see the all the MASs in the voice mail domain.

Click the MAS you want to integrate.

You may need to expand the tree to see the available PBXs

Double-click PBX Integration. The system displays the PBX Integration dialog box for that MAS, with the IP SIP tab active.

To configure PBX Integration IP SIP properties, complete the following fields:

MAS Details

Corporate IP Address Enter the IP address of the MAS. This is the IP address that the MAS uses to connect to the corporate LAN.

SIP Domain Enter a fully qualified IP domain name to assign to the SES Server.

Note: If you are unsure about this field, most often the SIP domain should be the root level DNS domain. For example, for the DS domain of eastcoast.example.com, the SIP domain would likely be configured to example.com.

RTP Port Range Enter a minimum and maximum port number to specify a block of real-time protocol (RTP) IP port numbers.

Packet Size Bytes Enter the size of the IP packets that are used for the real-time protocol.

MAS Listen Protocols

TLS Port Number Enter the IP port number used for the transport layer security (TLS) protocol.

TCP Port Number Enter the IP port number used for the transaction control protocol (TCP).

Enable Select to enable communication using the transaction control protocol.

SIP Proxies Select the check mark to enable or disable the use of each SIP proxy in the grid.

Proxy Displays the proxy number. This number is generated automatically.

IP Address/FQDN Enter the IP address or fully qualified domain name (FQDN) of the proxy.

TCP/TLS Enter either TCP or TLS, depending on which protocol the proxy uses to communicate with the MAS. The default is TLS

Port Enter the port number used by the protocol. The default is 5061.

VMSC - MAS - PBX Integration - IP SIP Tab

To open the PBX Integration dialog box:

To configure PBX Integration IP SIP properties, complete the following fields: