- In the Voice Mail System Configuration window, click Message Application Servers.
You may need to expand the tree to see the all the MASs in the voice mail domain.
- Click the MAS you want to integrate.
You may need to expand the tree to see the available PBXs
- Double-click PBX Integration. The system displays the PBX Integration dialog box for that MAS, with the General tab active.
- MWI Port Group Select the port group to be used for MWI. The Default Group is selected by default.
Port groups are created in the Port Groups dialog box. For more information, see MAS - Rules for Creating Port Groups.
- Max MWI Sessions Enter the maximum number of MWI sessions allowed at one time. The maximum number cannot exceed the maximum number of ports in the selected port group.
- Indicator On/Off signals must use the same port Select this, if your PBX has port affinity. This check box is cleared by default.
|
Notes:
- If you set this field after the initial installation of Avaya Modular Messaging and have been running for a while, you must also reset your switch.
|
- MWI On Enter the dial string required to switch on a subscriber’s MWI light. You can enter up to 50 characters. The default is ^O,%s,^O for NT M-1, and *4%s for G3. The system substitutes %s with the subscriber’s extension number.
|
Note:
This field is not available with QSIG integrations.
|
|
- MWI Off Enter the dial string required to switch off a subscriber’s MWI light. You can enter up to 50 characters. The default is ^F,%s,^F for NT M-1, and #4%s for G3. The system substitutes %s with the subscriber’s extension number.
|
Note:
This field is not available with QSIG integrations.
|
|
