- In the Voice Mail System Configuration window, click the voice mail domain.
- Click Message Application Servers.
- Click on the MAS you want to configure.
- Double-click Port Groups. The system displays the Port Groups dialog box for the selected MAS, with the General tab active.
- Port Group Select from the drop-down list the port group that you want to configure. The default is Default Group.
You can then use the other fields to configure the settings for this group.
- Port Group Members Lists the ports available on the current MAS. All ports are selected by default, when the system is installed. Ports installed after installation are not automatically included in a port group. You must add these ports to a port group for use by the MAS.
|
Note:
Ports referenced in the port group that no longer exist are marked with an exclamation mark (!).
|
|
- Select a port to add it to the selected port group. Clear a port’s check box to remove it from the selected port group.
- Port Group Usage
- Incoming Select this to permit the port group to receive incoming calls to the MAS. By default, this check box is selected.
- Outgoing Select this to permit the port group to send outgoing calls from the MAS. By default, this check box is selected.
- Add Group Clicking this button allows you to add a new port group:
- Click this button to display the Add New Group dialog box.
- In the Port Group Name field, enter a unique port group name.
- Click OK to return to the Port Groups dialog box, where you can define the settings for the new group.
- Remove Group Clicking this button removes the port group currently selected in the Port Group field.
The system prompts you to confirm your decision before it deletes the port group.
|
Note:
You cannot delete the Default Group.
|
|
