VMSC - MAS - Telephony Interface - Analog Tab (Analog)

To configure ports for Controlled LAN (C-LAN), Digital Multiplexed Interface - 4 (DMI-4), inband, or Serial RS-232 integration, use the Telephony Interface dialog box, Analog tab.

Notes: For an overview on configuring properties at MAS level plus important notes, see VMSC - Message Application Server Configuration If the Analog telephony interface is not already active, click the down arrow and click Make Active.

Playback Volume Enter a value for the playback volume. The range is -8 through 8. We recommend that you enter 2 for 30-port, 24-port, 8-port, or 4-port cards. For Controlled LAN (C-LAN) and Inband integrations, the default value is 2.

Number of Ports Enter the number of ports that connect the MAS with the PBX. The default is set during installation.

If you increase the number of ports, you must restart the MAS before you can administer them.

Enable DTMF Call Progress Tones (Available only if your system uses Brooktrout boards) Select this check box to configure selected ports to receive DTMF tones from the PBX.

Note: Avaya does not support Brooktrout port boards for Modular Messaging systems that run Release 3 software. All servers previously running with Brooktrout boards should be migrated to use Dialogic port boards.

Configure the port fields listed in the grid:

Enable or disable ports as required, by selecting or clearing the check boxes to the left of each port. All ports are selected by default.

Port The port number is read only.

Extension Enter the port extension number. You can enter up to 10 digits. This field is blank by default.

Incoming Ring Count Enter a number to specify the number of rings before a call on the port is answered. The range is 1 through 9, and the default is 1.

Primary Id Enter the first part of the PBX integration identifier, known as the logical terminal number (LTN), for serial integration only. You can enter up to 10 characters and digits (including & * # and ,). This field is blank by default.

Note: This field is applicable to DMI-4 and RS-232 integrations only. Leave this field blank for C-LAN and inband integrations.

Secondary Id Enter the second part of the PBX integration identifier, known as the message desk number (MD), for serial integration only. You can enter up to 10 characters and digits (including & * # and ,). This field is blank by default.

Note: This field is applicable to DMI-4 and RS-232 integrations only. Leave this field blank for C-LAN and inband integrations.

Tone File Path (Available only if your system uses Brooktrout boards.).

Enter the location of the tone file, accucall.ton. The location of the tone file is specified at installation. This is C:\Rht\ by default.

Note: If you are administering the voice mail system remotely and Voice Mail System Configuration is not running on the MAS, the Browse button is not available.

VMSC - MAS - Telephony Interface - Analog Tab (Analog)

To view Telephony Interface Analog properties:

To configure Telephony Interface Analog properties, complete the following fields: