VMSC - MAS - Telephony Interface - General Tab (IP H.323/IP SIP)

Modular Messaging Help

Getting Started

Administration

Maintenance

Reference

Home > MAS Administration > VMSC - MAS - Telephony Interface - General Tab (IP H.323/IP SIP)

VMSC - MAS - Telephony Interface - General Tab (IP H.323/IP SIP)

To configure ports for H.323-based or SIP-based IP integration, use the Telephony Interface dialog box, General tab.


Notes: For an overview on configuring properties at MAS level plus important notes, see VMSC - Message Application Server Configuration If the IP H.323/IP SIP telephony interface is not already active, click the down arrow and click Make Active.

To view Telephony Interface General IP H.323 properties:

In the Voice Mail System Configuration window, click the voice mail domain.

Click Message Application Servers.

Click on the MAS you want to configure.

Double-click the Telephony Interface.

The system displays the Telephony Interface dialog box for the selected MAS with the General tab active.

To configure Telephony Interface General IP H.323/IP SIP properties, complete the following fields:

Playback Volume Enter a value for the playback volume. The range is -8 through 8, and the default is 2.

Maximum Concurrent Calls Enter the maximum number of ports that connect the MAS to the PBX. This is the maximum number of concurrent calls that the MAS can support. The default is set during installation.

Configure the port fields listed in the grid:

Enable or disable ports as required, by selecting or clearing the check boxes to the left of each port. All ports are selected by default.

Port The port number is read only.

Top of page