VMSC - MAS - Telephony Interface Dialog Box

This topic describes how to use the Telephony Interface dialog box to configure the telephony interface to support analog or digital voice boards.


Notes: For an overview on configuring properties at MAS level plus important notes, see VMSC - Message Application Server Configuration You must configure the telephony interface for each MAS in your system.

Depending on the type of integration or the voice boards you are using, you can configure one of the following telephony interface types:

Analog To configure ports for Controlled LAN (C-LAN), Digital Multiplexed Interface - 4 (DMI-4), Inband, and Serial RS-232 integration, use the Telephony Interface (Analog) dialog box.

See VMSC - MAS - Telephony Interface Dialog Box (Analog).

QSIG To configure ports for Q-Signaling (QSIG) integration, use the Telephony Interface (QSIG) dialog box.

See VMSC - MAS - Telephony Interface Dialog Box (QSIG).

Set Emulation To configure ports for Digital Set Emulation (DSE) integration, use the Telephony Interface (Set Emulation) dialog box.

See VMSC - MAS - Telephony Interface Dialog Box (Set Emulation).

IP H.323/IP SIP To configure ports for H.323-based or SIP-based IP integration, use the Telephony Interface (IP H.323/IP SIP) dialog box.

See VMSC - MAS - Telephony Interface Dialog Box (IP H.323/IP SIP).