VMSC - VMD - PBX Configuration - Intercom Paging Tab (Dialogic Analog)

Use the PBX Configuration (Dialogic Analog) dialog box, Intercom Paging tab to configure PBX intercom paging properties for a voice mail domain. Using intercom paging, callers can page subscribers in the building, if they do not answer their extensions.


Notes: For Modular Messaging to do trunk-level paging, you must have additional hardware between the Modular Messaging system, the PBX, and the paging system. For more information, contact your Modular Messaging service or technical support representative. After you make changes to Intercom Paging properties, you must stop and restart the MAS. If you do not do so, the changes do not take effect. See MAS - Stopping and Restarting Modular Messaging (MM) Services.

To open the PBX Configuration dialog box, Intercom Paging tab:

In the Voice Mail System Configuration window, click the voice mail domain (VMD).

Double-click PBXs. The system expands the node to show all available types of PBX.

Double-click the Dialogic PBX. The system displays the PBX Configuration (Dialogic Analog) dialog box for the selected VMD, with the General tab active.

Click the Intercom Paging tab.

To configure PBX Configuration (Dialogic Analog) Intercom Paging properties, complete the following fields:

Enable Intercom Paging Select to allow a caller to page subscribers in the building, if they do not answer their extension.

This check box is cleared by default. Selecting it activates all the other fields in the tab.

Intercom Paging Code Enter the intercom paging code sent to the PBX to start intercom paging, if required by the PBX. This field is blank by default.

Release Code for Intercom Paging Enter the code sent to the PBX to stop intercom paging. This field is blank by default.

Repeat Intercom Paging Phrase Select to get the automated attendant to play the intercom paging phrase (“there is a call for <subscriber's name>”) twice instead of once. This check box is cleared by default.

Number of Retries when Paging System is Busy Enter a number to specify the number of times the voice mail system attempts to page a subscriber when met by a busy response. The range is 0 through 9, and the default is 3.

Number of Retries when No Answer Enter a number to specify the number of times a caller can request to page a subscriber whose extension is not answered. The range is 0 through 9, and the default is 3.

Paging Wait Time (sec) Enter the number of seconds a caller is kept on hold after paging a subscriber. The range is 0 through 99, and the default is 10.