VMSC - VMD - Serviceability - Query Originators Tab

Use the Serviceability dialog box, Query Originators tab to configure allowable Simple Network Management Protocol (SNMP) query origination points.

Launching the Screen

In the Voice Mail System Configuration window, click the voice mail domain.

Double-click Serviceability. The system displays the Serviceability dialog box for the selected voice mail domain, with the General tab active.

Click the Query Originators tab.

Configuring the Screen Controls

IP Address/Host Enter a specific IP address or host name for an allowable query originator, or accept the default.


Notes: You cannot specify a subnet. You can use Default, if you wish allow queries from any arbitrary origination point. You must, however, assign a community name.

Community Select a community name from the pick list. This name is used as validation in communications between the SNMP client and the SNMP server.

This list is populated via the Communities tab. See VMSC - VMD - Serviceability - Communities Tab. The default for a new query originator is the first item in the list.

Add Select to add an allowable query originator.

A row appears in the grid with default settings. You can then configure the IP Address/Host and Community fields.

Remove Removes the selected query originator from the list.