Configuring serial NEC/Ericsson/DMID properties

To configure serial integration for NEC, Ericsson, and DMID protocols, use the Serial NEC/Ericsson/DMID dialog box.

To display the PBX Integration dialog box, Serial NEC/Ericsson/DMID tab:

In the Voice Mail System Configuration window, click Message Application Servers.

Click the MAS you want to configure.

You may need to expand the tree to see the all the MASs in the voice mail domain.

Double-click PBX Integration for that MAS.

The system displays the PBX Integration dialog box, with the General tab active.

Click the Serial NEC/Ericsson/DMID tab.

To configure serial integration properties for NEC, Ericsson and DMID, configure the following fields:

For the NEC-2400:

Tenant Number Enter the tenant number used by NEC integration. The range is 1 through 99, and the default is 1.

For the Ericsson MD110:

Filler Character Enter the filler character used by Ericsson integration. The filler character can be zero or space. The default is space.

Port Field Length Enter the length of the port number field. The range is 2 though 5, and the default is 2.

Tenant Number Enter the tenant number used by Ericsson integration. The range is 1 through 99, and the default is 1.

First Port Number Enter the number of the first port to receive incoming calls. The range is 1 through 250, and the default is 1.

For the DMID:

Enable Full Error Logging from DMID Integration Device Select to place any errors reported by the DMID integration device in the Windows 2000 Significant Event Log. This check box is cleared by default.

Extension of First Port in DMID Hunt Chain Enter the extension number of the port that is the first directory number in the hunt chain programmed for the DMID device. This must be a valid extension number. This field is blank by default.