 |
 |
 |
 |
 |
 |
 |
 |
 |
 |
Made Easy Tool for DEFINITY Media Server Configurations
Issue 5, October 2002
Install and Connect MCC1 (Multicarrier) Cabinet
Connect Small Battery Holdover
Connect the small battery holdover cable to J20. See Power Distribution Unit (J58890CH).
Power Distribution Unit (J58890CH)
Figure Notes:
- Connect small battery holdover cable (or temperature sensor cable from large battery cabinet) to J20
- Carrier Circuit Breakers
- Ground Terminal Block
- Connect -48 VDC Return - 1 AWG (50 mm 2) red cable here.
- Connect -48 VDC - 1 AWG (50 mm 2) black cable
- 1 AWG (50 mm 2) 50 ft (15.2 m) cable to large battery cabinet. For cables greater than 50 ft (15.2 m), contact your Avaya representative.
- Ground Terminal Block
- To AC load center or approved single-point ground block
|
|
|
|
|
|
|
|
|
|
| Copyright� 2002 Avaya Inc. |
| Send comments to MadeEasy Development Team |
| Always check at the Made Easy Web site for the most current information. |