DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC

Made Easy Tool for DEFINITY Media Server Configurations
Issue 4, May 2002



Install and Connect MCC1 (Multicarrier) Cabinet   

Connect Ground Wires for DC-Powered Systems

Return to Task List


Caution! Do not connect any ground wires from an EPN cabinet to another EPN cabinet or to a PPN cabinet. All ground wires must be terminated at the single-point ground block at the main AC supply (AC mains).

  1. Connect a 6 AWG (#40) (16 mm 2) wire to the PPN cabinet ground terminal block.

  2. Route the wire to the AC mains single-point ground block and connect.

  3. Connect a 6 AWG (#40) (16 mm 2) wire to each EPN's cabinet ground terminal block.

  4. Route the wire(s) to the AC mains single-point ground block and connect.

  5. Connect a 6 AWG (#40) wire to the DC battery cabinet and DC power cabinet.

  6. Route wires to the AC mains single point ground block and connect them.

Return to Task List

DEFINITY Made Easy Home Page Table of contents Previous page Next page Index Links Frequently asked questions
Go to Upgrades for si Go to Installation for MCC Go to Installation for SCC
Copyright� 2002 Avaya Inc.
Send comments to MadeEasy Development Team



Always check at the Made Easy Web site for the most current information.