|
|
|
To modify a custom access type, use the following CLI command:
(configure)# set custom-access-type <catName> [sys-configuration {ro | rw | none}] [module-port-mgmt {ro | rw | none}] [events-mgmt {ro | rw | none}] [l2-switching {ro | rw | none}] [routing {ro | rw | none}]
Note: Unlike the custom-access-type command that you use to create a custom access type, you must specify read-only, read-write, or no permission when you use the set custom-access-type command to modify a custom access type.
|
|
|