Previous page Next page

Web Agent Procedure

To copy files using the Web Agent:

  1. In the navigation pane, expand the System > Configuration > Configuration Files folders, and then click File Management.

    2. The Configuration File Management Web page is displayed in the content pane. See Figure�22.

  2. See Table�12 for an explanation of the Configuration File Management parameters.

Table�12:�Configuration File Management Parameters �
Parameter
Description
Options
Save Running-Config to Startup-Config
Saves the running configuration to the startup configuration
N/A
Copy Source
Specifies the source file to be copied
  • Unspecified - Specifies an initialized value.
  • File - Specifies a source file located on the switch in NVRAM.
  • Running-Config - Specifies a running configuration.
  • Startup-Config - Specifies a startup configuration.
  • TFTP Server - Specifies a source file located in a directory on a TFTP server.
Source Filename
Specifies the path and name of the source file
Source files can be ASCII files in NVRAM available for upload or files located on a TFTP server available for download
Copy Destination
Specifies the location of the destination
  • Unspecified- Specifies an initialized value.
  • File - Specifies that a source is copied or downloaded to NVRAM.
  • Running-Config - Specifies that a source is copied to the running configuration.
  • Startup-Config - Specifies that a source is copied to the startup configuration.
  • TFTP Server - Specifies that a source is copied to a TFTP server location.
Destination Filename
Specifies the path and name of the destination file
Configuration files and other files can be copied to NVRAM on the switch or to a TFTP server as a destination location.
TFTP Server IP Address
Specifies the IP address of a source or destination TFTP server
Copy (download) source files, located on a TFTP server, to your running configuration, your startup configuration, or a location on the switch. Or, copy (upload) your configuration files, or a file located on the switch, to a TFTP server.

Note: If you select File or TFTP Server, you must also provide the path and filename of the source file in the Destination Filename field.

  1. Select one of the following options in the Copy Destination field:

Note: If you select File or TFTP Server, you must also provide the path and filename of the destination file in the Source Destination field.

  1. Enter the IP address of the source or destination TFTP server in the TFTP Server IP Address field, if applicable.
  2. Click Copy. The source configuration or file is copied to your specified destination.

Note: The Web Agent displays an Invalid operation! error message if you attempt to copy one of the following:


Previous page Next page