Web Agent Procedure

To use the Web Agent to set up an NBMA IP interface:

Note: RIP or OSPF must be enabled to set up NBMA neighbors.

Note: See "Creating and Assigning IP Interfaces to the VLAN" in Chapter 12:�Configuring IP Routing for option settings.

1. In the navigation pane, expand the Routing > IP > Configuration folders, and then click Interfaces.

The IP Interfaces Web page is displayed.

2. Click Create.

The Add IP Interface Web page is displayed.

3. Enter a name for the interface in the Name field.
4. From the Interface Type list, select NBMA.

Note: If you enter an IP address to create an NBMA neighbor entry to an interface that is not an NBMA type, the switch will return you to the NBMA Neighbor display page without displaying an error message.

5. Enter the appropriate information in the remaining fields.
6. In either the RIP or OSPF list or both lists, select Enable.
7. Click APPLY to save your changes, or CANCEL to restore previous settings.

Note: You must bring the IP interface Down to successfully enable OSPF on the IP interface. If you do not, you will get an error message and OSPF will not be enabled.