Web Agent Procedure

To view LDAP statistics using the Web Agent:

1. Select LDAP Statistics from the Routing > IP > Display group on the Web Agent window. The LDAP Statistics dialog box opens (Figure 12-43).

Figure 12-43. LDAP Statistics Dialog Box

2. Click Refresh to dynamically update LDAP Statistics parameters.
3. See Table 12-35 for an explanation of the LDAP Statistics dialog box parameters:

   Table 12-35. LDAP Statistics Dialog Box Parameters  

   Parameter	Definition
   Last Change	Displays the sysUpTime since this device was last modified. You can detect a change in the Policy Capabilities by polling a single object using this information.
   Producer Signal	The sequence number that, when modified, triggers the LDAP client to download the latest policy from the LDAP server. Typically, Avaya Policy Manager will set this value whenever there is a new policy to download. If this value is a non-zero value, the LDAP client will compare it to the producer signal on the LDAP server. No comparison is made if the value is zero.
   Consumer Signal	Indicates the success of the LDAP client when downloading a policy. If the consumer signal matches the producer signal, downloading LDAP to a policy was successful. If the consumer signal is -1, then either the LDAP client had a problem processing the access lists or the consumer signal set on the LDAP client did not match the signal configured on the LDAP server. If the consumer signal is not -1 and does not match the producer signal, then the LDAP client was unable to connect to the LDAP server(s).