Creating a Multinet Interface

To create a multinet interface:

1. Select Interfaces from the Routing > IP > Configuration group on the Web Agent window. The IP Interfaces dialog box opens (Figure 12-2).
2. Select CREATE. The Add IP Interface dialog box opens (see Figure 12-3).
3. Enter a name for the interface in the Interface field.
4. Select a VLAN for this multinet interface from the VLAN field pull-down menu.
5. Enter the network address associated with this interface in the Network Address field.
6. Select CREATE from the bottom of the Add IP Address dialog box. The IP Interfaces dialog box re-opens with the new interface name listed in the Interface field.
7. Repeat steps 2 through 6 for any other interfaces that you want to associate with the same VLAN.

NOTE: You must have a different network address for each new multinetting interface that you create for the same VLAN.

NOTE: The first IP interface that has the BootP/DHCP Relay Gateway enabled will be the relay.