Attendant Console alarm LED and alarm report acknowledgement LED

Yes

Status of G700 alarms is not available on the Attendant Console with a legacy controller.

Automatic Trunk Measurement System (ATMS)

No

Not available for analog trunks terminating on a Media Module.

DS0 Looparound connection

No

DS1 CPE Loopback

Yes

Test is controlled by the DS1 Media Module.

DS1 Synchronization

Timing sync is local to the G700 so DS1 sync is controlled by the G700.

Enable/Disable Media Module tests

Yes

Enable/Suspend alarm origination

No

Not supported by S8700 platform.

Environment tests and alarms for S8300

Not available for S8300 in R1.

ISDN loop around connection

Yes

ISDN test call

No

Not available for ISDN trunks terminating on a DS1 Media Module.

LED tests

Partial

Works with Media Module LEDs but not with the G700 alarm LED.

System Configuration Maintenance Object

No

Not needed for Media Module board insertion. Indicates that a board is present but that the board does not respond to a query for board type.

System Link test for PRI control link for ISDN DS1 Media Module

No

Layer 2 of a PRI link is terminated in the G700, so this does not apply to Avaya G700 with S8300 Media Server. A new MO is added for the status and alarming of H.248 links.

System tone test call for G700

No

Requires changes to the call processing software in the S8300 and the G700

Terminating trunk transmission test lines

No

Test MO command

Yes

Support syntax of Media Module location

Test S8300 hardware

Limited

Test of G700 resources:

Archangel

Network Control Element

Packet Interface

TDM clock

Tone generator

Tone detectors

No

Provided by G700 software in a future release. G700 architecture specifies these resources as G700 resources, not S8300 resources.

Tests of Media Modules

Partial

Limited by the tests available in R1.

Touch Tone Receiver facility test call

No

Touch Tone Receiver level

No

Trunk facility test call

Yes

Write Physical Angel command

No

System synchronization

No