Replacing an Avaya Octaplane Stacking Module

G700 Media Gateways can be mounted in equipment stacks with routers, switches, or other G700s. The stack is limited to ten elements. To link multiple units, each G700 must be equipped with an Avaya Octaplane Stacking Module which is mounted through the rear panel of the G700. See "Avaya MultiVantage^TM Solutions Hardware Guide, 555-233-200" for a general description of the hardware.

Insert an Avaya Octaplane Stacking Sub-Module

Begin _____________________

1. Undo the cables.
2. Remove the blank plate from the back of the G700.
3. Insert theAvaya Octaplane Stacking Sub-Module gently in the slot, ensuring that the metal base plate is aligned with the guide rails.
4. Press the Avaya Octaplane Stacking Sub-Module in firmly until the connector at the back of the module is completely inserted into the internal connector on the G700.
5. Tighten the screws on either side of the module.

End _______________________