Replacing an Avaya Expansion Module

The Avaya Expansion Modules provide vastly increased networking and connectivity capabilities. For a complete description of the Avaya Expansion Modules, see "Avaya^TM P330 Manager User Guide." These modules may be mounted in the G700 in the Expansion Module slot on the left side of the faceplate. The G700 must be powered off before you insert or remove an Avaya Expansion Module.

WARNING: The G700 must not be operated with any slot open; empty slots must be covered with the supplied blank plates.

CAUTION: The G700 must be powered off before you insert or remove an Avaya Expansion Module.

Replacing an Expansion Module in the G700

Begin _____________________

Power off the unit if the equipment has been in operation.

1. Identify and mark all cables.
2. Undo the cables.
3. Remove the blank plate covering the slot.
4. Align the printed circuit board with the interior guide rails.

Note: The printed circuit board fits into the guide rail. The metal base plate does not.

5. Firmly press the Expansion Module until it is completely inserted into the G700.
6. Tighten the two screws on the front panel of the Expansion Module.

End _______________________

WARNING: To prevent access to electrical hazards by unauthorized personnel and to ensure continued compliance to international radiated emissions requirements, all captive screws must be securely tightened such that they cannot be loosened without the use of a tool.