Install a TN799DP C-LAN���

Have the following equipment on site:

• An unoccupied port slot for the TN799DP.
• A 10 BaseT Ethernet connection into your LAN for the TN799DP.
• One or more valid, unused IP addresses on the network (one for each TN799DP C-LAN) that can be assigned to the C-LAN circuit pack. You also need the subnet mask and default gateway.

NOTE: Get this information from the network administrator or refer to the filled-out job aid entitled Pre-Installation Network Planning Forms--S8700 Media Server.

• A 259A adapter for each TN799DP.
• A CAT3 or CAT5 cable with a DW8 connector on each end.