Install a TN2302AP IP Media�Processor���

The TN2302AP consumes 16 watts of power and the power budget is 15�watts per slot. Do not fill every available slot in a given media gateway (G600 or SCC1) or carrier (MCC1) with them. Use the following guidelines:

• MCC1--18 per carrier
• SCC1--16 per media gateway
• G600--5 per media gateway

Have the following equipment on site before your shipment arrives:

• An unoccupied port slot in the media gateway for each TN2302AP IP Media Processor
• A 10 BaseT or 10/100 BaseT Ethernet connection into your local area network (LAN).
• One or more valid, unused IP addresses on the network that can be assigned to the IP Media Processor server. You also need the subnet mask and default gateway.

NOTE: Get this information from the network administrator or refer to the job aid entitled Pre-Installation Network Planning Form--S8700 Media Server.

In addition to the TN2302AP IP Media Processor, you must also install and administer a C-LAN circuit pack (TN799DP). For C-LAN installation and administration, refer to TN799DP Control LAN.