Log in Methods

This section describes how to log on to the S8300 Media Server using Telnet or the built-in Web Interface and how to start a SAT session. These procedures assume:

• You have a crossover cable directly connected from you laptop to the Services port on the Media Server and your laptop is configured for a direct connection
• Or, you are connected to the S8300 Media Server over the customer's LAN, either remotely or on site. In this case, your laptop must be configured to connect to the customer's LAN and you would use the LAN IP address of the S8300 instead of 192.11.13.6.

The last procedure in this section describes logging in to the Layer 2 Switching processor when you have a direct serial connection to the G700 Console port.