Hi,
I currently have a site which was recently upgraded to cs1000 Rel 7.5 High Availability. We need to connect some Audiocodes MP112 ATA's at remote locations for analogue capability. The Audiocodes Enpoints are registered in the NRS and the CS1000 Sip Gateway is registered in the NRS aswell, however we cannot call in either direction. Currently have connected the Audiocodes to LAN of cs1000 for testing purposes in same subnet so we are confident of no routing or firewall issues. We have implemented this with the assistance of an Application Document specifically for Audiocodes to CS1000 configuration on Release 7.5 and no joy!! On the TTY monitor when i call the CDP of the Audiocodes i get CAUSE: NO ROUTE TO DESTINATION but i can see that its picked up a Virtual Trunk TN via the RDB. Also when i do a Sip Routing Test from the NRS i get a response NO ROUTE FOUND. I can confirm that the call never tries to go to the Audiocodes endpoint via logs on the Audiocodes even though they are communicating at a registration level. I can confirm that my DOMAIN, UDP and CDP settings are correct. Is there something i'm missing that i have to do different because it is HA?? Elan Routing??
If anyone has done this before or got any ideas it would be greatly appreciated.
I currently have a site which was recently upgraded to cs1000 Rel 7.5 High Availability. We need to connect some Audiocodes MP112 ATA's at remote locations for analogue capability. The Audiocodes Enpoints are registered in the NRS and the CS1000 Sip Gateway is registered in the NRS aswell, however we cannot call in either direction. Currently have connected the Audiocodes to LAN of cs1000 for testing purposes in same subnet so we are confident of no routing or firewall issues. We have implemented this with the assistance of an Application Document specifically for Audiocodes to CS1000 configuration on Release 7.5 and no joy!! On the TTY monitor when i call the CDP of the Audiocodes i get CAUSE: NO ROUTE TO DESTINATION but i can see that its picked up a Virtual Trunk TN via the RDB. Also when i do a Sip Routing Test from the NRS i get a response NO ROUTE FOUND. I can confirm that the call never tries to go to the Audiocodes endpoint via logs on the Audiocodes even though they are communicating at a registration level. I can confirm that my DOMAIN, UDP and CDP settings are correct. Is there something i'm missing that i have to do different because it is HA?? Elan Routing??
If anyone has done this before or got any ideas it would be greatly appreciated.
