.
Analog set calls over QSIG to Cisco. If the call is redirected
on the Cisco side a FAC message is sent back to the CS1K. The CS1K sends a FAC back
to Cisco with namePresentationRestrictedSimple.
This only happens if the call is from an analog
set on the CS1K. If a 3900 series makes the same call the name is displayed.
Customer Upgraded to 7.6
analog phone----->CS1K----->QSIG------>CISCO--->redirect
when a call is processed to Cisco via analog phone the name is displayed .
when cisco redirects the same call names is changed to private. the issue is only
with analog phones. issue occured after the upgrade.
Fix patch:
MPLR33147
Machine Release
CPP4 (.pp4) X21 07.65P
TITLE
CPND NAME NOT DISPLAYED ON SET, AFTER QSIG TRANSFER DUE TO QCTN UPDATE HANDLED BY
CS1000 INCORRECTLY
There are no Special instructions mentioned on the patch
on the Cisco side a FAC message is sent back to the CS1K. The CS1K sends a FAC back
to Cisco with namePresentationRestrictedSimple.
This only happens if the call is from an analog
set on the CS1K. If a 3900 series makes the same call the name is displayed.
Customer Upgraded to 7.6
analog phone----->CS1K----->QSIG------>CISCO--->redirect
when a call is processed to Cisco via analog phone the name is displayed .
when cisco redirects the same call names is changed to private. the issue is only
with analog phones. issue occured after the upgrade.
Fix patch:
MPLR33147
Machine Release
CPP4 (.pp4) X21 07.65P
TITLE
CPND NAME NOT DISPLAYED ON SET, AFTER QSIG TRANSFER DUE TO QCTN UPDATE HANDLED BY
CS1000 INCORRECTLY
There are no Special instructions mentioned on the patch
