UPGRADE from 7.5 to 7.65 fail. System freeze when performing INI after database conversion.
SYS4439 is printed on sysload with a corrupted database.
SYSDB RLS/ISS: 765P DATE/TIME: 7/2/2014 15:50:12 KBYTES: 949 SEQNO: 2162 SYSLOAD ISSUE 7.65P: IDLE_SET_DISPLAY
SYS4439
Fix patch :MPLR33162 is created and has the below special instructions.
ONLY if SYS4439 is seen on Sysload, perform the following actions: 1. Load the patch to survive sysload: pdt> pload Patch filename? p33162_1.pp4 Retain patch (y/n)? [y] y Days patch vulnerable to sysload? [3] 0 In-service initialize threshold? [5] 0 In-service days to monitor inits? [7] 0 Loading patch from "/u/patch/p33162_1.pp4" Sysload and data dump are required after this patch activation. PCH0227: patch 242 has special instruction at the time of loading Continue with patch load (y/n)? [y]y Patch handle is: 242 2. Sysload the system, wait for it is operational. The message SYS4439 will be printed and the patch will correct the database. 3. When the system is fully loaded, make the data dump (LD 43, edd clr). On the next sysloads the SYS4439 will not be printed.
SYS4439 is printed on sysload with a corrupted database.
SYSDB RLS/ISS: 765P DATE/TIME: 7/2/2014 15:50:12 KBYTES: 949 SEQNO: 2162 SYSLOAD ISSUE 7.65P: IDLE_SET_DISPLAY
SYS4439
Fix patch :MPLR33162 is created and has the below special instructions.
ONLY if SYS4439 is seen on Sysload, perform the following actions: 1. Load the patch to survive sysload: pdt> pload Patch filename? p33162_1.pp4 Retain patch (y/n)? [y] y Days patch vulnerable to sysload? [3] 0 In-service initialize threshold? [5] 0 In-service days to monitor inits? [7] 0 Loading patch from "/u/patch/p33162_1.pp4" Sysload and data dump are required after this patch activation. PCH0227: patch 242 has special instruction at the time of loading Continue with patch load (y/n)? [y]y Patch handle is: 242 2. Sysload the system, wait for it is operational. The message SYS4439 will be printed and the patch will correct the database. 3. When the system is fully loaded, make the data dump (LD 43, edd clr). On the next sysloads the SYS4439 will not be printed.