DHCP Optin 242 issue for AVAYA IP OFFICE SE 12
Hello everyone,
I am using Avaya IP Office Server Edition 12 deployed as an OVA on ESXi 7. When I manually enter the server and SIP domain information into the Avaya J139 IP phone, everything works perfectly—the SIP user can register and make calls without any issues. However, when I use DHCP Option 242 (I'm using Windows Server as my DHCP server), the IP phone only receives some of the information, not all of it.
For example, in the J139, under IP Configuration > Servers,
This is my current DHCP Option 242 syntax:
MCIPADD=192.168.50.100,MCPORT=5060,HTTPSRVR=192.16 8.50.100,SIPDOMAIN=192.168.50.100,SIPPORT=5060,SIP _CONTROLLER_LIST=192.168.50.100:5060
Thank you and regards
I am using Avaya IP Office Server Edition 12 deployed as an OVA on ESXi 7. When I manually enter the server and SIP domain information into the Avaya J139 IP phone, everything works perfectly—the SIP user can register and make calls without any issues. However, when I use DHCP Option 242 (I'm using Windows Server as my DHCP server), the IP phone only receives some of the information, not all of it.
For example, in the J139, under IP Configuration > Servers,
- The HTTP IP address is filled out, but the HTTPS IP address is empty.
- Additionally, when I open 192.168.50.100:411/46xxsettings.txt in a browser, it shows as an unsecured webpage.
This is my current DHCP Option 242 syntax:
MCIPADD=192.168.50.100,MCPORT=5060,HTTPSRVR=192.16 8.50.100,SIPDOMAIN=192.168.50.100,SIPPORT=5060,SIP _CONTROLLER_LIST=192.168.50.100:5060
Thank you and regards
