Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   IP Telephony and Convergence (http://support.avaya.com/forums/forumdisplay.php?f=8)
-   -   one-x agent (http://support.avaya.com/forums/showthread.php?t=3709)

mscisk 09-27-2013 11:06 AM

one-x agent
 
Hi,

Environment:
CM R015x.02.1.016.4
IP_Agent 9
Call Center Release: 5.0
one-x Agent SP:2.5.20020.0
Agent logon using one-x agent with virtual station and agent extension (roadwarrior)
Agents have assigned skills with RONA functionality.

We are receiving complains from our clients that are geo spread over a world that from time to time they are not able to receive (pick up/answer) an incoming call. They said that one-x agent application is hanging. It is a little bit strang because so far we have checked just few one-x agent logs where we can see that one-x was ringing for 24sec after that call was disconnected (RONA). Agents are saying that they were pressing - pick up a call - but there was no response from one-x agent side. From logs we saw that thay try to pick up a call but a sec after a call was disconnected. That is probably why one-x popup appears - Operation Failed - Answer Call Failed.

Because it happens from time to time we are not able to reproduce a problem or set a trace on CM.

I have few questions:
a) does anyone face similar problem. how was it solved.
b) is there any unofficial doc describing how to inteprate one-x agent log files
c) what other things we can check (windows logs, any spec info from logs)
d) is it possible to check DSCP on PC for one-x signalling and RTP?

Even we see in one-x log file that softphone was ringing for 24sec is it possible that app lost connection with CLAN?
Because of geo location of one-x agents there is of course small delay but i do not believe it is more than 10-50ms. When we ping endpoints from clan it is less than 10ms.

One more thing. Lets assume below scenario:
Incoming call from PSTN (country A) -->ACM (country B) -->geo located agent (other country)
RONA is set for 3 rings. Are those 3 rings the 3 rings that called hear or the 3 rings from ACM to one-x station? If it is the first one (called) then i believe that the one-x agent has less that 3 rings to answer a call? is that true? In a log file i saw 24 sec, how it can be explained? - There is no so big delay between caller and Agent.

Thank You for any response and help.

regards,
michal

mscisk 09-29-2013 07:24 AM

I found this post:
http://www.iaug.org/p/fo/et/thread=37221

Did anyone try to use this? Disadventage is that that one-x will use DSP resources.

rehman3 06-02-2020 04:35 PM

I have same issue, my computer mode, Onex agent 2.5/CM7, on first ring user is getting "operation failed answer call failed" error

I am unable to open IAUG link, any idea how to fix this?


All times are GMT -7. The time now is 04:56 AM.