Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   Telephones, Adjuncts, and Adapters (http://support.avaya.com/forums/forumdisplay.php?f=27)
-   -   PRI ChannelsTesting with IP Office (http://support.avaya.com/forums/showthread.php?t=6163)

velas24 03-18-2015 04:30 PM

PRI ChannelsTesting with IP Office
 
Hello,

Is there a way to test every B channel on a PRI circuit with the IP Office? I am only allowed four people on a conference bridge and all other callers either get a busy signal or constant ringing and cannot connect to the conference bridge.
I would like to see if the Avaya IP Office V2 can test the B channels and see if one is corrupted or not working properly.

Thank you,

wellington35 03-19-2015 05:22 AM

Your trunk group should be programmed for ascending or descending allowing you to dial each time on a different channel. You also could programed each B-C. on separate trunk groups.

In regards to your Conf Bridge. I don't believe it's related to trunk capacity. You can test it internally by dialing your Conf Bridge Meet-Me Conf Shortcodes and see how many parties allowed.

velas24 03-20-2015 03:05 PM

Thank you. I will look into that.


All times are GMT -7. The time now is 09:45 AM.