Avaya Support Forums

Avaya Support Forums (http://support.avaya.com/forums/index.php)
-   Avaya Aura & Unified Communications (http://support.avaya.com/forums/forumdisplay.php?f=2)
-   -   CS1K 7.5/7.6 SW/UDT card rebooting randomly (http://support.avaya.com/forums/showthread.php?t=3937)

smaiyaur 11-25-2013 04:54 AM

CS1K 7.5/7.6 SW/UDT card rebooting randomly
 
Here has been lot of issues reported recently on UDT card which is rebooting randomly .There are some sites with 3UDT on MG1010 and had a similar issue.
MSDL300 24 0 1 FROM: SYS DSBL - SELF TESTING TO: SYS DSBL - SELFTESTS PASSED
TIME: 15:01:14

MSDL300 24 0 1 FROM: SYS DSBL - SELFTESTS PASSED TO: ENBL
TIME: 15:01:14

Avaya has investigated on these ongoing issues on UDT card and have found the fix. UDTCAB21 is the solution.

UDT21 validated against Rls 7.5 SP24 and Rls 7.6 SP4 .
This is the known fix content over what is already included in AB17 – Fix 1 and 7 are the big ones – 2-6 are cosmetic in nature.

1. Bug Fix. Position of CSTAT substate in shared memory corrected (fix for MSDL300/MSDL100).
2. Strengthen Upgrade processing – to not leave the board inoperative if the upgrade fails. Once the process starts, the load must reboot thereafter.
3. Global command datacoll moved to Admin user level. (so that you don’t need to go to debug level just to do datacoll and mreport).
4. Self-test. If IDPROM is empty, then fail the self-test with appropriate message (beneficial usage in the functional tester).
5. Add a flag which allows for the printing of PRI Hello messages.
6. Printed “running time” in the datacoll output now based on a lower resolution counter (in order to not wrap-around every +-2 days).
7. New FPGA load that fixes the data bus corruption on CEMUX that was the root cause of the PRI208 errors and is also expected to fix the 3 UDT card problem. (FIX for PRI208 and suspected fix for 3 UDT card issue)

I would also recommend an upgrade to the MGC loadware since it contains a fix that relates to UDT upgrades.

Here are the list of fixes in MGCCD04 that was released with 7.5 SP23. I’ve highlighted one that is related to UDT upgrades.


Table5: Fixes delivered to CS1000 MGC Loadware Service Pack23 (MGCCD04) MPLR Number
Description
MPLR32340
Users receive a burst of static on long distance (tdm) calls with MSEC enabled.
MPLR31888
On GR system, afs doesn't work on ACS in case outage of PCS.
MPLR31901
Dual Homing vulnerability leaves IPMG without service after data network disruption.
MPLR32224
SRPT4653 appears constantly
MPLR32302
Upgrade of the UDT loadware caused the mgc to reboot.
MPLR32385
After powering down of system(including MGC/S and power the system back up) and turning on system after , the MGC/S gateways aren't showed in output of "stat u s refresh" command on CS
MPLR32419
DCHs do not recover automatically after an INI of Call Server
MPLR32431
Unable to login using SSH on VxWorks Call Server
MPLR32480
BERR504 in task CemuxIOSrv
MPLR32561
HB can lead to pre-mature link down
MPLR32627
Medial CLID feature to support displaying of 16 digits
MPLR32632
FAX T.38 and MPT incorrect Switchover Method
MPLR32727
The patch removes diag output from MPLR32632





All times are GMT -7. The time now is 06:27 AM.